Yaletown Sew-Along: Cutting Your Fabric & Gathering Supplies

Sew-AlongWidget_YaletownHello everyone and happy labor day, to those who celebrate it!

Today is another Yaletown Sew-Along prep day. We get to start cutting and preparing our pieces for our first sewing day, which is in a week. Here is a recap of what we’ve covered so far, and you can click the badge to the left to catch up on all of our Yaletown Sew-Along posts so far.

Yaletown Sew-Along: Fabric Suggestions, Choosing a Size, and FAQ
Yaletown Sew-Along: FBA and SBA Tutorials and Tips
Today – Cutting, Gathering Supplies
TBA – Preparing Bodice and Sewing Facing (Instruction Steps 1-4)
TBA – Finishing Facing, Sewing Bodice Side Seams (Instruction Steps 5-7)
TBA – Sewing Skirt / Lower Blouse (Instruction Steps 8-10)
TBA – Sewing Bodice to Skirt, Sewing Elastic Casing (Instruction Steps 11-13)
TBA – Sewing & Attaching Sleeves (Instruction Steps 14-17)
TBA – Hemming, Sewing Tie Belt (Instruction Steps 18-19)
TBA – Thread Loops and Securing Neckline (Instruction Steps 20-21)

First, let’s talk about the handy tools that we’ll be using for both cutting out and sewing up our garments. I don’t often cover tools in the sew-along, but I thought it would be a fun thing to mention!

Yaletown Sew-Along Tools NeededFor cutting, you will need:

  • A ruler, to help you to line up the grainline.
  • A pair of dressmaker’s shears, or a rotary cutter (and mat, not shown) – for cutting!
  • Pattern weights (I use hockey pucks) or pins, for keeping your pattern pieces in place while laying them out and cutting.
  • Tailors chalk or a whatever your favorite marking/tracing tool might be.

For the sewing part, you will need:

  • Pins.
  • A seam gauge, great for hems and measuring seams. (Not necessary, but I can’t live without mine!)
  • A seam ripper. Just in case.
  • A needle and thread, for basting.
  • A tape measure.
  • Snips, embroidery scissors, tailor’s points, or any small scissors to keep nearby for trimming threads, etc.

Yaletown Sew-Along Supplies NeededNow would also be the time to gather fabrics, notions, and supplies. Here is what you’ll need:

  • Fabric (Look at mine! Aren’t those flamingo’s the cutest ever?)
  • Matching thread. I have one spool of polyester thread for my sewing machine, and four cones of thread for my serger/overlock machine. You don’t need a serger, so don’t worry if you don’t have one! You can simply finish your raw edges with pinking shears or a zig zag machine stitch.
  • One yard of 1/4″ wide elastic.
  • One yard of fusible interfacing.
  • One 3/8″ button (optional).

I always recommend pre-washing fabric the same why you intend to wash your final garment. Most fabrics will shrink a lot on the first wash, so it’s good to get this out of the way before sewing anything up.

Finally, give your fabric a nice press before laying it out for cutting.

Yaletown Sew-Along Cutting 1Once your fabric is pre-washed and ready to go, it’s time to lay it out and start cutting. Use the cutting layouts provided as a guide. We use standard widths to plan out these layouts. But fabric widths can vary widely, so if you find a fabric saving layout that you like better, go for it!

Yaletown Sew-Along Cutting 2Here’s my method for cutting: I lay out my pieces, weight them down with pattern weights, and trace around them with my handy chalk pen. Then I remove my pattern pieces, pin the fabric to keep things in place, and cut with my dressmaker’s sheers.

You could also use a rotary cutter and mat, just lay out your pieces, weigh them down with pattern weights, and cut away! This is a very precise and quick method for cutting. The only caveat is sometimes larger pieces don’t fit on the mat, so you have to resort to cutting the old fashioned way anyways.

Of course, simply pinning your tissue down and cutting with dressmaker’s sheers is a perfectly fine way to cut as well! This is how I did it for years and years before exploring new methods.

Yaletown Sew-Along Cutting 3Remember when laying out your pieces, use a ruler to check that your grainlines are parralel to the selvedge or fold line of your fabric.

Yaletown Sew-Along Cutting 4Here’s another shot of my favorite cutting method. I trace with chalk, pin and then cut! It seems involved but it’s actually quite quick.

Yaletown Sew-Along Cutting 5Once your pieces are all cut out, go through and snip your notches.

Yaletown Sew-Along Cutting 6Let’s go ahead and cut out our fusible interfacing pieces as well. Grab your facing pieces (pieces 6 and 7), and trace them on your fusible.

Yaletown Sew-Along Cutting 7Here’s a trick: instead of cutting right along your traced line, cut a little bit inside. This way, you are guaranteed not to have any sticky fusible extend beyond your fabric and muck up your ironing board.

Yaletown Sew-Along Cutting 8Here you can see what it looks like when you trim the fusible slightly smaller than the fabric.

Yaletown Sew-Along Cutting 9While we’re at it, let’s fuse our facing pieces. I always use a scrap press cloth to do this, so that I don’t get any glue on my iron. Use a low heat setting, and press your fusible in an ‘up and down’ motion, instead of dragging your iron across. I like to hold my iron down for a good 30 seconds at a time to make sure it sticks. Once you’re all done, inspect your piece to make sure the fusible is stuck on there nicely. If there are any parts pulling away, give them another press.

Yaletown Sew-Along Cutting 10There we go. So now we have our pieces all cut out and notched, and our facings interfaced. We are ready to start sewing!

, ,

11 Responses to Yaletown Sew-Along: Cutting Your Fabric & Gathering Supplies

  1. Libby September 1, 2014 at 3:08 pm #

    I love your blog, and the simplicity of your projects. Always a pleasure.

  2. Erma Kelso September 1, 2014 at 5:33 pm #

    I have made a muslin and the bodice is a good 3″ too long. I am not a short person–I am 5’7″. I could tell by looking at the pattern that it was going to be too long but I went with the pattern. Now, I am not sure what to do–make another muslin shortening the
    bodice 3″? Also, the neck part doesn’t look like the picture–it is very high on me. At
    this point, I am disappointed in the pattern. And also, where in the pattern does it say
    to cut interfacing for the facings?

  3. Erma Kelso September 1, 2014 at 7:33 pm #

    I wrote earlier about the bodice being 3″ too long. But actually, upon measuring again, it is actually 2″ too long so I have made another muslin 2″ shorter and now I have to think about changing to a smaller bust but thank goodness you have shown us how to do that. Thank you.

    • Caroline Amanda September 2, 2014 at 7:19 am #

      Hi Erma,

      I’m so sorry that you ran into some frustrating fit issues with the pattern! It sound like shortening the bodice helped a bit, I’m glad it did! A small bust adjustment should help to open up the neckline as well for you, so yes, that may be the solution.

      To answer your question about the interfacing: On the facing pattern pieces, it says “Interfacing: cut 2” (or 1, depending on which piece you’re looking at).

      Please feel free to contact us anytime at info[at]sewaholic[dot]net if you run into any further issues. I wish that our patterns could fit every body right out of the envelope, but we are all built so differently. It’s normal to have to make some adjustments to get the ideal fit. :) I hope you have not been discouraged.

      We definitely want you to have a good experience with the patterns and we are happy to try to help you to get there! Don’t hesitate to e-mail us anytime.

      All the best!

  4. Jessica September 2, 2014 at 10:07 am #

    Super cute fabric! Saw it (or something quite similar) at the fabric store the other day and was drawn to it like a moth to light – my boyfriend had a ??? look on his face, haha. I will live vicariously through you to see how it looks in the Yaletown :-).

    Thanks for the tip on cutting interfacing ~ makes a lot of sense! And much simpler than making funky tracing adjustments (my current method).

  5. Miss J September 2, 2014 at 11:12 am #

    Love your hockey puck weights, very clever and much better than pins.

    Tell us more about how you use your seam gauge, mine is just gathering dust. Great pictures,

    J.

  6. Erin September 8, 2014 at 12:27 pm #

    I’m OBSESSED with this fabric! Sadly, I can’t find it online to buy anywhere – I checked your recommended places of Harts, Mood, and Vogue. :( Do you know of any other online resources that sell this fabric? Thanks!!

    • Tara September 9, 2014 at 8:42 am #

      Yes! I too love this fabric! Where can we get it? I’m going to Miami in October and this WOULD BE PERFECT

    • Caroline Amanda September 9, 2014 at 9:45 pm #

      Hi Erin & Tara! I picked it up wholesale, so I’m not sure where you can get it online! Let me see what I can figure out though… I have a fabric related announcement coming in the next couple of weeks (shh), so stay tuned! :)

      • Tara September 10, 2014 at 12:39 pm #

        Thanks! That would be awesome! And **OOOOOHHHH**** Can’t wait!

Trackbacks/Pingbacks

  1. Riding Peplum Top + A Giveaway | Sewbon - September 22, 2014

    […] place in my heart for birds. So when I saw the amazing flamingo fabric Sewaholic is using for the Yaletown sew along, I set out on a mission to find […]