Fraser Sweatshirt: Sewing the Set-In Collar

The Fraser Sweatshirt is one of those quick, easy, and satisfying projects. It sews up in a flash and doesn’t take up a lot of fabric! I think the trickiest bit in this garment is sewing the set-in collar for View C.

It can be a bit tough to get nice, clean corners with knit fabrics. So I decided to put together a step-by-step tutorial for you with some extra tips.

Fraser Sweatshirt Collar Tutorial 2

We’re starting off on the very first step for view C, so we have pattern piece #9 (front) and #10 (collar pieces). Here’s a small extra step that I like to do to get really nice clean corners.

Fraser Sweatshirt Collar Tutorial 5

We’re working with ⅜” (1cm) seam allowances for the set-in collar. Mark your corners on the right side of the garment at a scant ⅜” (1cm) from the raw edge.

Fraser Sweatshirt Collar Tutorial 8

Stitch along your marking lines with a short stitch length, and clip into your seam allowance until the corner.

Fraser Sweatshirt Collar Tutorial 9

Grab your collar pieces and mark your corners on the wrong side at a ⅜” (1cm) from the raw edge.

Fraser Sweatshirt Collar Tutorial 10

Pin your right collar piece to the body, right sides together, along the long edge. Line up your marked corners (you can stick a pin right through both corners to secure them together as I did above).

Fraser Sweatshirt Collar Tutorial 12

Start sewing at the shoulder. Remember: use a seam allowance of ⅜” (1cm).

Fraser Sweatshirt Collar Tutorial 13

Stop sewing right at your corner. (Take your time!)

Fraser Sweatshirt Collar Tutorial 14

Insert your needle, lift the presser foot, and pivot your collar. You will also pivot your front body piece so that you are now lining up the short raw edge of your collar with the corresponding edge of the body. Lower your presser foot and sew the rest of this seam ending at the center front.

Fraser Sweatshirt Collar Tutorial 15

Give it a nice press, seam allowances pressed towards the body.

Fraser Sweatshirt Collar Tutorial 16

Time for the left side. This time we’ll start sewing at center front.

Fraser Sweatshirt Collar Tutorial 17

Stop sewing at the corner that you’ve marked, ⅜” (1cm) from raw edge.

Fraser Sweatshirt Collar Tutorial 18

Insert your needle, lift the presser foot, and pivot your pieces so that the long raw edges are lined up. Lower your presser foot and finish sewing your collar!

Fraser Sweatshirt Collar Tutorial 19

Give your collar a final press, seam allowances towards the body. You can trim your seam allowances or overlock them together at this point.

Fraser Sweatshirt Collar Tutorial 20

Et voilà! Nice clean and crisp corners. The additional step of stay stitching and clipping the corners prior to sewing is especially great if you’re working with a knit that is a little bit more delicate and stretchy. In this case I’m using bamboo terry. Something like a hefty double knit or ponte de roma will be easier to sew and you probably don’t even have to worry about any extra steps.

, ,

9 Responses to Fraser Sweatshirt: Sewing the Set-In Collar

  1. My Handmade Space February 16, 2016 at 7:06 am #

    Looks very nice using contrasting fabrics. Thanks for the tutorial.

  2. Lana February 16, 2016 at 10:07 am #

    Hi Caroline,

    This looks like a fun project!

    Do you recommend any sewing communities that I should be a part of? I am obsessed with making my own things.

    Thank you!

    Lana

  3. Hillary Koodirile February 16, 2016 at 11:33 am #

    It appears easy to follow

  4. Linda February 16, 2016 at 1:26 pm #

    Hi Caroline
    Did you do a fba for the Fraser sweatshirt?

    • Caroline February 23, 2016 at 5:10 pm #

      Hi Linda, sorry for the delayed reply. I missed this! No I did not do a FBA.

      • Linda March 3, 2016 at 2:58 pm #

        Thank you Caroline.

  5. Annette February 17, 2016 at 9:08 am #

    Hi Caroline and TFS! Very much! Annette

  6. Sophie April 7, 2016 at 7:16 am #

    Many thanks for this tutorial, that works very well! Indigotine